2015 Touring – BOOM! BOX INFOTAINMENT SYSTEM – CB MODULE: FORK MOUNTED FAIRING

Written by

Removal

1. Remove main fuse. See 7.3 SYSTEM FUSES AND RELAYS.

2. Remove outer fairing. See 2.37 OUTER FAIRING AND WINDSHIELD: FORK MOUNTED FAIRING MODELS.

3. See Figure 7-92. Disconnect:
a. CB antenna cable connector (2).
b. CB module connector (1).

4. Remove screw (3). Remove CB module.

Installation

1. Slide CB module into place. Verify the alignment pins engage the holes in the enclosure.

2. Install screw (3). Tighten to 25-35 in-lbs (2.8-4.0 Nm).

3. See Figure 7-92. Mate connectors:
a. CB antenna cable connector (2).
b. CB module connector (1).

4. Install outer fairing. See 2.37 OUTER FAIRING AND WINDSHIELD: FORK MOUNTED FAIRING MODELS.

5. Install main fuse. See 7.3 SYSTEM FUSES AND RELAYS.

CB Module Bracket

1. Remove upper fairing support. See 2.39 INNER FAIRING: FORK MOUNTED FAIRING MODELS, Upper Support Bracket.

2. Remove screw securing bracket to speaker enclosure.

3. Install bracket to speaker enclosure. Tighten to 25-35 in-lbs (2.8-4.0 Nm).

4. Install upper fairing support. See 2.39 INNER FAIRING: FORK MOUNTED FAIRING MODELS, Upper Support Bracket.

Comments