2015 Touring – MAIN WIRING HARNESS – REMOVAL: FORK MOUNTED FAIRING MODELS (PART 2)

Written by

1. Remove outer fairing. See 2.37 OUTER FAIRING AND WINDSHIELD: FORK MOUNTED FAIRING MODELS.

2. See Figure 7-115. Separate connectors (1-9). Remove from retaining devices if present.

3. Remove dash panel. Disconnect switches. See 2.38 DASH PANEL: FORK MOUNTED FAIRING MODELS.

4. Disconnect ignition switch connector. See 7.15 IGNITION SWITCH AND FORK LOCK.

5. Pull dash panel switch and ignition switch harnesses forward into fairing area.

6. ABS equipped: See Figure 7-114. Separate wheel speed sensor connector (2).

7. Release brake line retainer (1) from steering head caddy.

8. See Figure 7-113. Loosen retainer screw. Pull retainer securing each steering head caddy.

9. Remove both caddies from steering head.

10. Pull main harnesses rearward and allow to hang.

NOTE

Continue procedure at 7.35 MAIN WIRING HARNESS, Removal: All Models (Part 3).

Comments