2015 Touring – MAIN WIRING HARNESS – REMOVAL: ROAD KING MODELS (PART 2)

Written by

1. Remove headlamp assembly. See 7.9 HEADLAMP.

2. See Figure 7-111. Separate connectors (1-4) at left steering head caddy. Leave main harness connectors secured to caddy.

3. Separate ground wire leading to left upper fork bracket.

4. See Figure 7-112. Separate connectors (1, 2) at right steering head caddy. Leave main harness connectors secured to caddy.

5. Remove brake line retainer (4). Leave lines captured in retainer.

6. Loosen caddy retainer screw (5). Remove retainer securing each steering head caddy.

7. Remove both caddies from steering head.

8. Disconnect nacelle switch connectors (3).

NOTE

Continue procedure at 7.35 MAIN WIRING HARNESS, Removal: All Models (Part 3).

Comments