2015 Touring – TRANSMISSION SIDE COVERS: HYDRAULIC CLUTCH – REMOVAL

Written by

1. Remove seat.

To prevent accidental vehicle start-up, which could cause death or serious injury, disconnect negative (-) battery cable before proceeding. (00048a)

2. Disconnect negative battery cable.

3. Remove transmission filler plug/dipstick.

4. Drain transmission.

5. Remove components necessary to access side covers.

6. See Figure 6-7. Remove outer side cover (5).

7. If necessary, remove secondary clutch actuator (3). See 6.7 SECONDARY CLUTCH ACTUATOR.

8. Remove inner side cover (1). Discard gasket (2).

9. Clean and inspect inner side cover. Clean with denatured alcohol only.

NOTE

If damaged, replace locating dowels in inner side cover.

Comments