Cam Compartment Service Only
1. Remove exhaust system. See 4.18 EXHAUST SYSTEM.
2. Remove fuel tank. See 4.6 FUEL TANK.
3. Remove air cleaner and backplate. See 4.5 AIR CLEANER ASSEMBLY.
4. Remove spark plugs. See 1.19 SPARK PLUGS.
5. Remove purge solenoid hose, if equipped, from induction module. See 4.20 EVAPORATIVE EMISSIONS CONTROL SYSTEM.
6. Twin-Cooled models: See C.5 COOLING SYSTEM REPAIR, Upper Coolant Line Removal.
a. Disconnect coolant manifolds from cylinder head lines.
b. Remove clamp securing hoses to front cylinder head. Move hoses out of the way.
Top End Service
1. Complete all steps under Cam Compartment Service Only.
2. Remove induction module. See 4.13 INDUCTION MODULE.
3. Gather disconnected branches of main harness and tape to top of wire trough to keep out of the way.
4. Remove two screws to release top engine stabilizer bracket from front cylinder head. Remove screw to release
stabilizer link from frame weldment.
Leave a Reply