1. Cover the front fender to protect finish.
2. Place a container under the motorcycle to catch excess oil.
3. See Figure 3-11. Pull out on the bottom of the oil cooler cover (4) to disengage the lower retaining pins, then pull up and remove cover from oil cooler.
4. Remove screws (1) securing the oil cooler (3) to the frame.
5. Slide clamps (5) down the oil hoses (6, 7). Disconnect hoses from the oil cooler adapter (8).
6. Remove the oil cooler.
7. Inspect oil cooler for dirt, debris and damage.
8. To remove hoses from the oil cooler, cut clamps (2).
Leave a Reply