1. See 3.18 TOP END OVERHAUL: DISASSEMBLY.
a. Remove breather assembly.
b. Remove rocker arm support plate.
c. Remove pushrods and pushrod covers. Do not remove lifters or lifter covers.
d. Support hydraulic lifters from dropping into the cam compartment using SCREAMIN’ EAGLE MAGNETIC LIFTER HOLDERS (Part No. 93979-10). See 3.26 CAM COMPARTMENT AND COMPONENTS.
2. Remove cover and cam support plate. See 3.26 CAM COMPARTMENT AND COMPONENTS.
3. Carefully remove oil pump assembly from crankshaft.
4. See Figure 3-114. Remove and discard O-rings (1, 2).
5. See Figure 3-115. Disassemble and inspect oil pump components.
Leave a Reply