2015 Touring – TOP END OVERHAUL : DISASSEMBLY – CYLINDER HEAD

1. See Figure 3-21. Following the sequence shown, loosen the six rocker housing bolts. Remove rocker housing bolts.

2. Remove rocker housing and gasket. Discard gasket.

NOTE

To prevent distortion of the cylinder head, cylinder and cylinder studs, gradually loosen the cylinder head bolts in the specified sequence.

3. See Figure 3-22. Remove cylinder head bolts:
a. Alternately loosen cylinder head bolts 1/4 turn at a time the sequence shown.
b. Remove the cylinder head bolts.

4. Remove cylinder head and head gasket.

NOTE

Save the cylinder head gasket (if salvageable) for use with the CYLINDER TORQUE PLATES (Part No. HD-42324-A) when measuring, boring or honing of the cylinder is required.

5. For inspection and repair information, see 3.22 CYLINDER HEAD.