1. Remove main fuse. See 7.3 SYSTEM FUSES AND RELAYS.
2. Twin-Cooled models:
a. See Figure 7-68. Remove coolant pump cover (4).
Cut cable strap (3).
b. Remove screws (1) securing coolant downtubes.
c. Remove screw (5) securing thermostat.
d. Pull down tube assembly away from frame to access nut securing voltage regulator.
3. Remove regulator from lower frame:
a. Remove locknuts from studs on lower frame crossmember.
b. Lift voltage regulator off studs. Allow voltage regulator to hang upside down at front of lower frame crossmember.
4. See Figure 7-70. Release locking latch. Remove voltage regulator connector [77] (2).
5. Release locking latch. Remove stator connector [46] (1).
Leave a Reply