1. Remove seat. See 2.30 SEAT.
Disconnect negative (-) battery cable first. If positive (+) cable should contact ground with negative (-) cable connected, the resulting sparks can cause a battery explosion, which could result in death or serious injury. (00049a)
2. Remove negative cable from battery.
NOTE
The battery positive cable and power wire for the main fuse are crimped together at the starter ring terminal.
3. Remove battery positive and main fuse power cable ring terminal from starter solenoid stud.
4. Remove starter solenoid connector [128] at front of starter.
5. Remove engine oil filler cap/dipstick. Cover fill spout with clean shop cloth to keep out dirt and debris.
6. Remove starter mounting screws.
7. Remove starter. Avoid losing the ring dowels.
Leave a Reply