2015 Touring – PRIMARY CHAINCASE COVER – REMOVAL

Written by

To prevent accidental vehicle start-up, which could cause death or serious injury, disconnect negative (-) battery cable before proceeding. (00048a)

1. Disconnect negative battery cable.

2. Drain the primary chaincase lubricant. See 1.10 PRIMARY CHAINCASE LUBRICANT, Changing Primary Chaincase Lubricant.

3. Remove left passenger footboard and bracket as an assembly. See 2.52 FOOTBOARDS AND FOOTRESTS.

4. Remove screw securing jiffy stand interlock sensor, if equipped. See 2.53 JIFFY STAND, Jiffy Stand Interlock Sensor.

5. Remove left rider footboard and brackets as an assembly. See 2.52 FOOTBOARDS AND FOOTRESTS.

6. Mark position of heel shift lever in relation to shaft.

7. Remove pinch screw securing heel shift lever. Remove heel shift lever.

8. See Figure 5-1. Remove nine short (1) and four long (2) cover fasteners. Remove cover.

Comments