2015 Touring – IGNITION COIL – INSTALLATION

1. See Figure 7-9. While holding ground terminal wires out of the way, place ignition coil (1) into position.

2. Install battery hold-down bracket (3) and screws (2).
Tighten to 32-40 in-lbs (3.6-4.5 Nm).

3. Tighten ground terminal nut (4) to 50-90 in-lbs (5.7-10.2 Nm).

4. See Figure 7-8. Install ignition coil connector.

NOTE

Frame is stamped with “F” and “R” near the coil towers to identify correct cable attachment.

5. Connect spark plug wires (1, 2) to ignition coil towers.

6. Install battery. See 1.22 BATTERY MAINTENANCE.