2015 Touring – ELECTRICAL CADDIES – TOP CADDY

Written by

Removal

1. Remove seat. See 2.30 SEAT.

2. See Figure 7-4. Remove HFSM antenna (6), if present.

3. Lift up on ECM (3) until free of caddy.

4. Remove connectors (4, 5) from retaining devices.

5. Remove screws (2).

6. Lift caddy and slide purge valve solenoid (7) from caddy, if present. Remove caddy.

Installation

1. See Figure 7-4. Install purge valve solenoid (7) on caddy (1). Place caddy into position over battery.

2. Install screws (2). Tighten to 72-96 in-lbs (8.1-10.9 Nm).

3. Install ECM (3).

4. Install HFSM antenna (6) onto caddy, if present.

5. Secure connectors (4, 5) to retaining devices.

6. Install seat. See 2.30 SEAT.

Comments