2015 Touring – AIR CLEANER ASSEMBLY – AIR CLEANER REPAIR

Written by

Insert: With Screw Access

1. See Figure 4-6. Remove air cleaner cover (3).

2. Apply heat from a heat gun to inside of cover in area of cover insert (2).

3. Remove old cover trim.

4. Thoroughly remove all remaining adhesive from cover.

5. Install new cover trim plate using supplied adhesive.

Insert: Without Screw Access

1. See Figure 4-6.Pull on front edge of insert (15) to remove.

2. Remove old trim retainer material.

3. Thoroughly remove all remaining adhesive from cover.

4. Carefully align new decorative plate with retainer material attached. Press and hold in position on cover (3) for 10 seconds.

NOTE

Do not remove decorative plate for 24 hours.

Snorkel

1. See Figure 4-6. Pry bezel (14) off. A pry point is provided on the bottom of the bezel rim.

2. Remove snorkel (12) from cover.

3. Replace screen (13) if necessary.

4. Assemble components back onto cover making sure that snorkel and bezel are securely mated.

Comments