2015 Touring – SYSTEM FUSES AND RELAYS

Written by

NOTE

All Touring model motorcycles use a common fuse block. Actual fuse assignment may vary based on model and options.

Removal

1. Remove left saddlebag. See 2.31 SADDLEBAGS.

2. Remove left side cover.

3. Press in tabs on the left and right sides of fuse block cover.
Remove the cover.

4. See Figure 7-1. Remove system fuse or relay from fuse block. Replace fuse if the element is burned. Automotive type ATO fuses are used.

Installation

1. See Figure 7-1. Install system fuse or relay in fuse block.

2. Install fuse block cover.

3. Install left side cover.

4. Install left saddlebag. See 2.31 SADDLEBAGS.

Comments