2015 Touring – CLUTCH RELEASE COVER: CABLE CLUTCH – REMOVAL AND DISASSEMBLY

1. Remove main fuse.

2. Remove exhaust system if needed. See 4.18 EXHAUST SYSTEM.

3. Drain transmission. See 1.11 TRANSMISSION LUBRICANT.

NOTE

Actuating the clutch hand lever after removing the six screws will help break the cover free.

4. See Figure 6-3. Remove six screws securing the clutch release cover. Remove the clutch release cover. Discard the gasket.

5. Add free play to clutch cable. See 1.12 CLUTCH CABLE: ROAD KING.

6. See Figure 6-4. Remove retaining ring (4). Lift inner ramp (5) and ramp coupling (3) out of clutch release cover.
Disconnect clutch cable end (2) from the ramp coupling (3).

7. Remove coupling (3) from inner ramp.

8. See Figure 6-5. Remove balls (4) and outer ramp (2).

9. Remove clutch cable fitting from clutch release cover.